Prices
(Last updated 23rd January 2006)
Price
Carriage, Packing,
& Insurance
1019
Micro Lathe in kit form with choice of 3 or 4-jaw chuck (Tailstock not included)
£160.00
£9.00
1020
Micro Lathe, assembled, with choice of 3 or 4-jaw chuck (Tailstock not included)
£175.00
£9.00
1025
Three jaw self centering chuck, steel body, with reversible soft aluminium jaws
£45.00
£5.00
1027
Additional blank soft jaws for #1025
£8.00
£3.00
1030
Four jaw chuck, with reversible, heat-treated steel jaws
£45.00
£5.00
1034
Lathe dog, holds workpiece when turning between centres
£24.00
£3.00
1035
Face plate
£14.00
£3.00
1036
Face plate angle bracket set
£8.00
£3.00
1040
Collet set, collet closer with 8 collets sized 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, and one blank
£22.00
£3.00
1041
3/16" collet and closer for use with milling cutters
£7.00
£3.00
1042
Four blank collets, unslotted (may be bored & slotted for special purposes)
£4.00
£1.00
1091
0-1/4" Jacobs chuck
£8.00
£3.00
1092
1/16"-3/8" Jacobs chuck
£9.00
£3.00
1093
5/64"-1/2" Jacobs chuck
£10.00
£3.00
1120
Grinding wheel arbour - screws directly onto spindle
£8.00
£3.00
1122
Grinding wheel set
£9.00
£3.00
1150
Drilling tailstock - lever operated
£32.00
£3.00
1151
Needle bearing centre - spring loaded
£14.00
£3.00
1160
Spare belt
£8.00
£1.00
1161
6 step pulley set (2 pulleys) including Vee belt for 11mm motor shaft
£23.00
£3.00
1162
6 step pulley set (2 pulleys) including Vee belt for 1/2" motor shaft
£23.00
£3.00
1095
6 piece tool bit set - HSS, left & right, round nose, boring bar, cutoff, 45 degree chamfer
£22.00
£2.00
1200
Compound top slide - mounts on cross-slide for cutting angles and tapers - with toolpost
£45.00
£4.00
1220
Milling attachment (vertical slide) - mounts on cross slide, 2" X 3.75" table
£58.00
£5.00
1230
Milling cutter - 2 flute double ended slot drill - 1/16" diameter, with 3/16" shank
£7.00
£1.00
1231
Milling cutter - 2 flute double ended slot drill - 3/32" diameter, with 3/16" shank
£7.00
£1.00
1232
Milling cutter - 2 flute double ended slot drill - 1/8" diameter, with 3/16" shank
£7.00
£1.00
1233
Milling cutter - 2 flute double ended slot drill - 5/32" diameter, with 3/16" shank
£7.00
£1.00
1234
Milling cutter - 2 flute double ended slot drill - 3/16" diameter, with 3/16" shank
£7.00
£1.00
1235
Fly cutter, 1.25" to 2.25" diameter, fits headstock, tool bit included
£24.00
£3.00
1000
Lathe and motor mounting assembly - including hinged motor plate
£22.00
£5.00
1002
New GEC 1/4 HP electric motor - 11mm shaft
£45.00
£10.00
1250
Riser block kit for headstock and toolpost (provides 6" swing)
£21.00
£3.00
1251
Tailstock riser block
£18.00
£3.00
1140
Drill chuck arbour - attaches Jacobs chucks to headstock spindle
£9.00
£3.00
1190
Steady rest - fits to bed to support long shafts etc. 3/32" to 1.5" diameter
£20.00
£3.00
1180
HSS Slitting saw - 2.5" diameter X 0.32" thick
£8.00
£3.00
1181
Slitting saw arbour
£7.00
£3.00
1182
Tailstock die holder for 13/16" and 1" diameter button dies
£20.00
£3.00
1170
Extra toolpost (as supplied with the lathe)
£8.00
£3.00
1171
Back toolpost, tool bit mounts upside down, 2 tools may be used at the same time
£8.00
£3.00
1173
T-bar cutoff tool, height adjustable
£24.00
£3.00
1132
Blank arbour, 1" diameter (screws onto headstock spindle, may be machined for special jobs)
£8.00
£3.00
1210
Radius turner, swings toolbit in an arc for ball turning etc.
£22.00
£3.00
1221
3/4" X 16 TPI chuck adapter, adapts chuck to cross slide or milling machine table
£9.00
£3.00
1225
Milling vice, 1.25" opening, 2" wide
£24.00
£3.00
1252
Laser cut headstock spanner, 1" AF, 1/8" thick, facilitates chuck removal
£5.00
£3.00
2001
4-jaw woodturning self-centering chuck
£48.00
£5.00
2002
Woodturning 2-prong drive centre
£7.00
£3.00
2003
Woodturning revolving centre inc. point and cone centre
£9.00
£3.00
2004
Woodturning face plate
£8.00
£3.00
2005
ASHLEY ISLES miniature woodturning tools (set of 4)
£32.00
£3.00
2006
Woodturning toolrest, 4" swivel joint, adjustable height
£24.00
£3.00
2007
£15.00
£2.00
2008
"Basic Taig Microlathe Operations" - a 2 hour DVD giving useful instruction on basic lathe machining techniques using the Taig/Peatol micro lathe
£20.00
£2.00
2100
Micro mill - complete, manual operation
£549.00
£12.00
2101
Set of 3 NEMA 23 stepper motor mounts and couplers (for converting the mill to CNC)
£150.00
£5.00
Items 1019 and 1020 may be ordered with a four jaw self centering woodturning chuck (#2001) as an alternative to the three or four jaw metalworking chuck.
Customers ordering a lathe with accessories need only remit £9.00 for carriage, etc.
Customers ordering a mill with accessories need only remit £12.00 for carriage, etc.
Customers ordering accessories only where the carriage, etc. charge exceeds £6.00 need only remit £6.00
All major credit cards accepted - same day dispatch for credit card orders
SEND ALL ORDERS OR ENQUIRIES DIRECTLY TO PEATOL USING THE CONTACT INFORMATION BELOW, PLEASE - ORDERS AND ENQUIRIES CANNOT AND WILL NOT BE ACCEPTED VIA EMAIL UNDER ANY CIRCUMSTANCES.