Chucks:

• 3-jaw chuck with self-centering, replaceable soft jaws
• 4-jaw chuck with self-centering, replaceable soft jaws
• 4-jaw chuck with hardened, independent jaws

Collets:

• Collet set with closer and 8 collets
• Collet sizes 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, and 5/16 inches
• One blank collet supplied for machining to other sizes

Face plate:

• Heavy duty, steel face plate
• 3.25" diameter
• T-slots for work holding
• Set of angle brackets and T-bolts also available

Tailstock:

• Sensitive lever feed tailstock
• Adjustable set-over for turning long tapers
• Threaded to accept Jacobs drill chuck for axial drilling operations
• Thread also accepts tailstock die holder for cutting external threads

Vertical Slide:

• Permits small-scale milling operations in the lathe - the slide is mounted on the lathe cross-slide
• Gives a rise and fall movement of 1-5/8"

Fixed steady:

• Supports long sections of round stock for accurate machining
• Adjustable brass fingers

Drill chucks:

• Allow axial drilling when mounted on the tailstock
• Headstock spindle adapter allows drilling of items mounted on the cross slide or vertical milling slide
• 1/4, 3/8 and 1/2 inch capacity chucks available

Tailstock die holders:

• Holds 13/16" or 1" diamter dies

Compound slide:

• Easily fitted to the cross-slide
• Adds vesatility by allowing the machining of short tapers and chamfers

Rotating (live) centre:

• Fitted with needle roller bearings
• Replaces the normal tailstock ram
• Permits tailstock support at higher rotational speeds

Slitting saw:

• The slitting saw arbor screws onto the spindle nose
• The saw blade is 2.5" diameter, 0.32" thick, in HSS

Raising blocks:

• Allow the headstock to be raised, increasing the capacity of the lathe to 6" diameter
• Separate block raises the toolpost to the new centre height

Ball turning tool:

• Attaches in place of the normal toolholder
• Allows spherical turning - for example, to produce ball-ended handles

Woodworking accessories:

• A toolrest allows the use of hand tools in the lathe
• Further woodturning accessories include a face-plate, 2-prong driven centre, revolving (live) tailstock centre with point and cone inserts, and miniature wood turning tools
• The 4-jaw self-centering chuck is useful for holding square-section wood for turning