# Scalextric Pitstop 
C190  # Track identification.  Must be < 5 characters.
 Pitstop set # Track description.  Must be <= 25 characters.
   9.87500 # Width of the track in inches.
  48.00000 # For straight tracks, the height in inches.  For curved tracks this is the inner radius of the track body.
   0.00000 # The angle of the track in degrees.  Determines the snap angle for curved tracks.
   0.00000 # Track gap 0.  For custom tracks set this to 0.
   0.00000 # Track gap 1.  For custom tracks set this to 0.
0 # Rotation.  For custom tracks set to 0.
0 # Vertices. For custom tracks set to 0.
0 # Curved flag. Set to 0 for straight tracks and 1 for curves.
1 # Track ID.  This number must be unique for each custom track you create.  Greater than 0 and less than 20000. Keep 1 to 1000 reserved for official SnapTrack versions
0 # Base style.  Determines snap behaviour. 0=std, 1=chicane, 2=1/2 chicane, 3=chicane extension
0 # Track make.  0 = Scalextric original, 1 = Sports Track, 2 = custom
2 # Number of connection nodes.  Normally 2 but set to 4 for intersections.
   3.06250 ,    0.00000 # Coordinate of the first attachment node
   3.06250 ,   48.00000 # Coordinate of the second attachment node
   0.00000 ,    0.00000 # Coordinate of the third attachment node
   0.00000 ,    0.00000 # Coordinate of the fourth attachment node
#
# Definition of the multipoint line defining the base outline
#
8 # The number of points in the multi-point line.
   0.00000 ,    0.00000 # Coordinates of point 1
   0.00000 ,   48.00000 # Coordinates of point 2
   6.12500 ,   48.00000 # Coordinates of point 3
   6.12500 ,   43.00000 # Coordinates of point 4
   9.87500 ,   39.00000 # Coordinates of point 5
   9.87500 ,    9.00000 # Coordinates of point 6
   6.12500 ,    5.00000 # Coordinates of point 7
   6.12500 ,    0.00000 # Coordinates of point 8
#
#
# Details of the multipoint line defining track 1
#
6 # The number of points in the multi-point line.
   1.48770 ,    0.00000 # Coordinates of point 1
   1.48770 ,   48.00000 # Coordinates of point 2
   1.48770 ,   43.00000 # Coordinates of point 3
   8.39370 ,   36.09400 # Coordinates of point 4
   8.39370 ,   11.90600 # Coordinates of point 5
   1.48770 ,    5.00000 # Coordinates of point 6
#
#
# Details of the multipoint line defining track 2
#
6 # The number of points in the multi-point line.
   4.63730 ,    0.00000 # Coordinates of point 1
   4.63730 ,   48.00000 # Coordinates of point 2
   4.63730 ,   33.84400 # Coordinates of point 3
   7.60630 ,   30.87500 # Coordinates of point 4
   7.60630 ,   17.12500 # Coordinates of point 5
   4.63730 ,   14.15600 # Coordinates of point 6
      
#
#
# Details of the multipoint line defining the outline of the yellow area
#
0 # The number of points in the multi-point line.
#

# Scalextric Goodwood chicane
C177  # Track identification.  Must be < 5 characters.
 Goodwood chicane # Track description.  Must be <= 25 characters.
   6.12500 # Width of the track in inches.
  20.75000 # For straight tracks, the height in inches.  For curved tracks this is the inner radius of the track body.
   0.00000 # The angle of the track in degrees.  Determines the snap angle for curved tracks.
   0.00000 # Track gap 0.  For custom tracks set this to 0.
   0.00000 # Track gap 1.  For custom tracks set this to 0.
0 # Rotation.  For custom tracks set to 0.
0 # Vertices. For custom tracks set to 0.
0 # Curved flag. Set to 0 for straight tracks and 1 for curves.
2 # Track ID.  This number must be unique for each custom track you create.  Greater than 0 and less than 20000. Keep 1 to 1000 reserved for official SnapTrack versions
3 # Base style.  Determines snap behaviour. 0=std, 1=chicane, 2=1/2 chicane, 3=chicane extension
0 # Track make.  0 = Scalextric original, 1 = Sports Track, 2 = custom
2 # Number of connection nodes.  Normally 2 but set to 4 for intersections.
   3.06250 ,    0.00000 # Coordinate of the first attachment node
   3.06250 ,   20.75000 # Coordinate of the second attachment node
   0.00000 ,    0.00000 # Coordinate of the third attachment node
   0.00000 ,    0.00000 # Coordinate of the fourth attachment node
#
# Definition of the multipoint line defining the base outline
#
4 # The number of points in the multi-point line.
   0.00000 ,    0.00000 # Coordinates of point 1
   0.00000 ,   20.75000 # Coordinates of point 2
   6.12500 ,   20.75000 # Coordinates of point 3
   6.12500 ,    0.00000 # Coordinates of point 4
#
#
# Details of the multipoint line defining track 1
#
6 # The number of points in the multi-point line.
   2.66880 ,    0.00000 # Coordinates of point 1
   2.66880 ,    1.50000 # Coordinates of point 2
   4.55020 ,    7.50000 # Coordinates of point 3
   4.55020 ,   13.25000 # Coordinates of point 4
   2.66880 ,   19.25000 # Coordinates of point 5
   2.66880 ,   20.75000 # Coordinates of point 6
#
#
# Details of the multipoint line defining track 2
#
6 # The number of points in the multi-point line.
   3.45620 ,    0.00000 # Coordinates of point 1
   3.45620 ,    1.00000 # Coordinates of point 2
   5.33760 ,    7.00000 # Coordinates of point 3
   5.33760 ,   13.75000 # Coordinates of point 4
   3.45620 ,   19.75000 # Coordinates of point 5
   3.45620 ,   20.75000 # Coordinates of point 6
#
#
# Details of the multipoint line defining the outline of the yellow area
#
0 # The number of points in the multi-point line.
#