ISOM front page  Map style index  Text index  Land forms index  Rock and boulders index  Water and marsh index  Vegetation index  Man-made features index  Overprinting and technical symbols index  OCAD symbols index  email to author

ISOM 2000 - 2.4

Generalisation and legibility

See Also...International Specification for Orienteering Maps    ISOM Index    Symbols Index    Map type index     previous    next

This page contains content from ISOM2000   This page contains content from Ashby Mapping    revision 01/00

Generalisation and legibility

Good orienteering terrain contains a large number and a great variety of features. Those which are most essential for the runner in competition must be selected and presented on the orienteering map. To achieve this, in such a way that the map is legible and easy to interpret, cartographic generalization must be employed. There are two phases of generalization-selective generalization and graphic generalization.

Selective generalization is the decision as to which details and features should be presented on the map. Two important considerations contribute to this decision-the importance of the feature from the runners' point of view and its influence on the legibility of the map. These two considerations will sometimes be incompatible, but the demand for legibility must never be relaxed in order to present an excess of small details and features on the map. Therefore it will be necessary at the survey stage to adopt minimum sizes for many types of detail. These minimum sizes may vary somewhat from one map to another according to the amount of detail in question. However, consistency is one of the most important qualities of the orienteering map. missing phrase

Graphic generalization can greatly affect the clarity of the map. Simplification, displacement and exaggeration are used to this end. Legibility requires that the size of symbols, line thicknesses and spacing between lines be based on the perception of normal sight in daylight. In devising symbols, all factors except the distance between neighbouring symbols are considered.

The size of the smallest feature which will appear on the map depends partly on the graphic qualities of the symbol (shape, format and colour) and partly on the position of neighbouring symbols. With immediately neighbouring features, which take up more space on the map than on the ground, it is essential that the correct relationships between these and other nearby features are also maintained.

 

Notes

Text that is new or revised from ISOM1990 is shown in maroon type.

Where text has been removed or significantly altered from ISOM1990 this symbol appears in the text, clicking on the symbol will jump to the section below on this page with the details of this amended text.

Changes from ISOM1990

Missing text: - "and therefore the same selective criteria must be used throughout the map."

Click to go to the top of this page

International Specification for Orienteering Maps produced by the International Orienteering Federation
OCAD produced by Hans Steinegger Software. © 1988-1999 Hans Steinegger. ® OCAD is a registered trademark of Hans Steinegger
This document has been written and coded by Peter Hornsby of Ashby Mapping
Apologies for any mistakes and errors; please inform details of any problems, thanks.
Produced for the Ashby Mapping internet site on 20 November 1997 and 1 December 1999  ©1997-2000 Ashby Mapping
Revised 28 December 1999, 23 March 2000