Rubber Midsection
These have come out really well but take approximately a week to make. I have to put multiple layers of thin latex in and then back this up with multiple layers of brush thick latex. I then add a thin layer of soft expanding foam. These are very time consuming to make so I will not be able to make many. They need to be trimmed to size and zips glued in.
These are glossy jet black. Most latex needs to be painted to give a smooth finish as the plaster is porous and sometimes leaves tiny air bubbles it is also usually a matt colour but the way I do these makes them smooth and glossy with only a light spray of silicon needed to protect them and give them an added shine. They are very flexible and soft. You can see the lower parts have a high waistband to accommodate taller people. These are perfect for wearing.
PRICE: 4 parts £120 UKGBPounds plus shipping made to order, you will need to add your own zips or velcro.
Click here for a little video of the flexibility of the midsection.
I have managed to make a rubber top half based on Bruces plastic version, came out good. Made of soft latex and foam. If you buy these you do not need the underarm parts.
Below is my first latex rubber midsection that is very comfortable with zips up the side, you an see how they have progressed to what I have now.
It is in four pieces which I have added zips up the sides to make into two sections. This enables me to move, twist and bend freely. It has a lot of length adjustment built in with the high waist band.
