The Perfect place to go for Ped stuff!!

-:Join our club:-

click above!!

Home
Pics
My ped
Chat
Message Board
Tech articles
Dates
Pedders in the U.K.
Tech Help
The Physics
Links

This is fairly straight forward to do and increases compression. 


Materials:

Socket Wrench and socket bit.
RED Locktite
Side cutters
Philips head screw driver
Procedure :
  1. Remove engine shroud.
  2. Remove spark plug with socket set.
  3. Use the side cutters to remove the ring at the top of the spark plug
  4. Put a little Locktite around where the ring was, not on the threads.
  5. NGK spark plugs are the best
  6. put the spark plug back on and the engine cover
  7. Re-attach the ignition coil to the spark.
 
Any problems with this site or improvements should be sent to John. I am not responsible for anything that you do to your goped through my site, these instructions are correct so at least follow them!!