
The BEAR CLAW DRYWALL REPAIR CLIPS are designed to replace a damaged section of drywall with a new section of drywall. The clip is superior to the thin metal repair sheets because it replaces the damaged section with a full 12.5mm piece of drywall instead of a flimsy metal patch. This helps to maintain the sound and fire integrity of the original wall. The BEAR CLAW DRYWALL REPAIR CLIPS work by using a series of "Claws" compressing into the existing wall. The clips tabs are used to make the face of the patch board perfectly flush with the face of the wall. Many of the repair products presently on the market use the back of the drywall to align the patch. Unfortunately, not all drywall is the exact same thickness and sometime the patches are either depressed or project past the wall. With the BEAR CLAW DRYWALL REPAIR CLIP a 12.5mm (1/2") piece of drywall can be used to patch 12.5mm (1/2"), 15mm (5/8") or 25mm (1") board equally well. How's that for versatility!
Repair Instructions
Typical Hole in Wall   Trace Patch Outline on Wall
Cut Around Outline Remove Damaged Section
Put the Clips on Patch Place Patch into Wall
Apply Joint Compound & Tape Sand Smooth, Primer and Paint