heatshield

Exhaust Manifold Heatshield

C20XE Cavalier & Calibra	£55.00 + P&P
C20LET Cavalier & Calibra	£55.00 + P&P
C20NE Cavalier & Calibra (may fit others)	£55.00 + P&P
X20XEV Calibra (may fit others)	£55.00 + P&P
C20XE Astra GSI	£55.00 + P&P

All our heatshields are laser cut from 1.6mm Stainless Steel and hand finished with a Brushed finish. They come with all necessary fittings to enable quick and trouble free installation.

Logos available: Vauxhall Griffin, OPEL Blitz & VXR or BLANK.

If you do not see your model listed above then please contact us. We can produce 'one-off' designs specially for you car. You can have you own design or club logo (if permission is granted) laser cut into your heatshield. One-Off designs cost an extra £20-£40 depending on the complexity of the design.

If you order FIVE or more identical custom heatshields at one time, then we can do them for about the same price as our 'stock' heatshields... £55.00.

C20XE & C20LET to fit Cavalier & Calibra

£55.00 + P&P

To fit Calibra & Cavalier C20XE (Red Top) & Turbo

Logos available: Vauxhall Griffin, OPEL Blitz & VXR or BLANK.

Kit comprises:
1 x Brushed Stainless Steel Heatshield (of your choice).
3 x Stainless Steel M6 Socket Cap Screw.
2 x Rubber Pad (not self adhesive) to stop vibration on radiator mounts.

Vauxhall Griffin

Opel Blitz

Note: The 16V version does not have the scallops, for the turbo pipes, cut out of the left hand side of the heatshield (as shown below right).

Un-Cut

VXR (C20XE shown)

C20NE to fit Cavalier & Calibra

£55.00 + P&P

Logos available: Vauxhall Griffin, OPEL Blitz & VXR.

Note: This heatshield bolts directly to the exhaust manifold and because of this we cannot guarantee that discolouration will not occur. If discolouration does occur, it is a simple job to polish the heatshield with 'Autosol' or similar.

X20XEV to fit Calibra (May also fit Vectra and others)

£55.00 + P&P

Note: Dipstick is on the LEFT.

Logos available: Vauxhall Griffin, OPEL Blitz & VXR.

Please note there are two different Ecotec models. This is for 'Dipstick on LEFT'

Shown fitted with colour coded mesh behind the Griffin.

C20XE to fit MK 3 Astra GSI

£55.00 + P&P

Logos available: Vauxhall Griffin, OPEL Blitz & VXR.

Picture fitted coming soon!

Coming Soon V6