Gordon Reynolds - Software Downloads
Author : Gordon Reynolds.
EMail : firstname.lastname@example.org
Tested Windows 7
Tested Windows 95/98
32 and 64 bit Operating Systems
This Dielectric Test software was written to create download and store
test parameters required for the testing of insulation using a
Sefelec Dielectric unit to test ground continuity and current leakage.
Programm download in this version is effected via a IEEE card interface.
Up to 3 Test units may be controlled via the software and setting the
Primary Address of Device.
The Card Installed tick box top left corner should be set if IEEE card is
fitted to PC and Dielectric Test unit Connected.
Test Programmes to load are selected via the right hand window.
The software can be in either programmer or operator mode.
In programmer mode Command lines 1 and 2 can be changed and test programmes
added or deleted.
In Operator Mode Programmes to load and the interface may be chosen but
test parameters cannot be altered.
Selecting the Operator / Programmer button alternates the the user
between Operator and programmer by the use of a password.
Initial password set to - password .
In this mode the password may be changed Via Change Password.
Tests may be added or Deleted via the Add/Find and Delete buttons.
Data loaded to the test unit via the IEEE card is entered into Commands
Lines 1 and 2.
The Test Instructions field is intended for user test guidence comments.
Includes Visual Basic Source Code.