Extended coverage for Kenwood TH215E handheld
            =============================================

This is a very simple mod which will extend the receive/transmit range of a
TH215E to approx 141.000-162.000MHz.

1. Remove battery pack and undo four screws which hold rig together.
2. There is a PCB inside the case half with the keypad on. On this PCB there
   are four jumpers (J1 to J4) which are next to one of the large ICs.
   Jumper J3 should already be cut and requires re-bridging with a blob of
   solder. Then cut jumper J2 for extended receive, and cut jumper J1 for
   extended transmit.
3. Replace back and screws etc,.

73 Andrew G0OEY @ GB7DNS

(Downloaded from GB7SYP)