How to use additives
Just by adding a small amount of additive to our clear powder when over coating
a base colour you can create a metallic/flip finish!
a base colour you can create a metallic/flip finish!
Step 1
Powder coat and cure part with a base colour, note dark colours tend to produce the best results.
Powder coat and cure part with a base colour, note dark colours tend to produce the best results.
Step 4
Seal bag (leave plenty of air in) then shake
for 2 minutes
Seal bag (leave plenty of air in) then shake
for 2 minutes
Step 5
Attach earth lead to bare metal area
Attach earth lead to bare metal area
Step 7
Cure part as normal at 180 deg c for 10 min's
and remove from heat source, part is now
complete.
Cure part as normal at 180 deg c for 10 min's
and remove from heat source, part is now
complete.
Orange Flake
1 Tub £5.99
1 Tub £5.99
Note 1 Tub converts1/4kg of powder
Step 3
Prepare metallic mix - Add 1 tub of additive
to 1/4kg of powder, note the more you add the more reflective the finish.
Prepare metallic mix - Add 1 tub of additive
to 1/4kg of powder, note the more you add the more reflective the finish.
Step 2
Make sure you have left an exposed area to attach your earth lead to for the second stage of this process.
Make sure you have left an exposed area to attach your earth lead to for the second stage of this process.
Step 6
Fill powder coating gun with metallic mix and spray part as normal, note it will coat white and cure back to translucent
Fill powder coating gun with metallic mix and spray part as normal, note it will coat white and cure back to translucent
Blue Flake
1 Tub £5.99
1 Tub £5.99
Orange Flake on Black
Blue Flake on Blue
Orange Flake on Orange
Green / Brown Flip Additive on Black
Green / Brown Flip Additive
1 Tub £5.99
1 Tub £5.99
More Colours Comming Soon!
Red/Gold Flip
1 Tub £5.99
1 Tub £5.99
Blue Pearl
1 Tub £5.99
1 Tub £5.99
PurplePearl
1 Tub £5.99
1 Tub £5.99
