|
|
The
Shelf Bracket
These
brackets are
custom
designed
for the
specific situation. They provide counterbalanced support for either two 20 inch
or two 40 inch planters mounted on opposite sides of a metal railing or provided
with a wider top if straddling a concrete wall.
The Cradle BracketThis
bracket is ideal where a planter can only be suspended from a high position. The
cradle is able to hold an 8 inch by 1 inch plank under the planter if this is
helpful during planting, with the planter ‘cradled’ within the two brackets.
However, the planter is sufficiently strong without the need for such support.
If
a 40 inch planter is required in an open position, then it is sometimes planted
in situ, either on a plank if more convenient or again it is perfectly
acceptable to simply position the cradle bracket centrally on the planter. The
cradle bracket is then suspended
using the standard ‘Bloom Master’ chain.
The Adjustable Bracket This
bracket is intended for 20 inch planters where the mounting location is either
difficult or uneven. Naturally, the bracket is mounted firstly, either using the
loop chains around a horizontal bar or utilising the two top screw fixing holes
and then levelling by means of the adjustable bottom bar. The planter can then
be firmly secured behind the front lip and two top locking straps .
All mounting bracket prices will be determined at the start of the 2004 season and until that time prices will be on application
|
|
Send mail to webmaster@bloommaster.co.uk with
questions or comments about this web site.
|
