Fireman's side of tender front showing rear lookout window, cab side door in the open position, fire iron tunnel and handbrake. 

Driver's side of tender showing water scoop handle (non-working) and coal space door.

One of the tender wheel bearings and springs.

Sequence of six photographs of the tender under side, starting with the dragbox, and tender drawbar pin.

Labeled photo of the tender brake shaft.

The front axle, with rear of dragbox, steam brake cylinder, water drain pipe (from coal space), and brake rodding turnbuckles.

Cross bracing between chassis to support the tender tank. The lagged pipe (white) is the steam heating pipe to the tender buffer beam.

The centre axle, with brake hanger and brake shoe, brake cross beam and pull rods.

The rear axle, with one of the frame spacers behind.

Labeled photo of the tender dragbox. 

Labeled photo of the tender front. 

Photo added 6th May 2003

Labeled view of tender coal space. 

Fitting one of the tender intermediate buffers. The rectangular slot to the right of the buffer is the location for the drawbar.

Tender brake shaft after manufacture.

Raising the tender frames, using two cranes, to enable fitting of the tender axle boxes.

Positioning the leading tender axle boxes into the hornguides.

Axlebox and spring in place awaiting fitting of spring keeps and horn keep. 

Tender tank fitted to re-wheeled chassis.