Mould clay around it in any pattern 65mm long. This is the chimney (see picture).
Step 17
Mould the clay into the shapes of the pistons each 30mm long (see picture).
Make sure there are holes for cocktail sticks (see picture).
Step 18
Stick the front wheels to the bottom of the tank. Make sure the back of the wheels are 35mm from the back of
the front section of the tank. Also make sure they are 1 third distance from either side.
Stick the axle (step15) to the back of the front section, at the bottom.
Stick the boiler (cylinder, step 13) on to the axle and against the front section.
Stick the back wheels on, make sure they are straight.
Stick the pistons on either side.
Stick the chimney on the back of the boiler.
See picture in gallery for positions
How to build an Empire Steam Tank
Click the page numbers below to view more pages.
