Release
Details:
PB Pro 0.8 - released 24th July 2007
PB Pro 1.6g - released 6th January 2008
New features for version 1.6g
PB Pro 1.7h - released 9th May 2008
New features for version 1.7h
PB Pro 1.8f - released 24th December 2008
New features for version 1.8f
PB Pro 1.8h - released 21st April 2009
New features for version 1.8h
Important Note:
It has been found during tests that the overload detect is not as sensitive in analogue mode as it is in digital mode, particularly at lower throttle speeds. Avoid prolonged short circuits when in analogue mode.
Do not put analogue cars on the track when in digital mode.
Download Files:
PB Pro 0.8 - released 24th July 2007
PB Pro 1.6g - released 6th January 2008
New features for version 1.6g
- AUX in commands enabling a PC to control the powerbase
- Additional AUX out data to send powerbase settings to PC
- Programmable minimum lap times
- Timed disabling of random lane change to prevent pace cars entering into a pit lane
- Programmable Track Call delay
- User defined throttle maps (requires a PC with PB Pro compatible software)
- Improved automatic car registration
- Enhanced overload setup and detect
PB Pro 1.7h - released 9th May 2008
New features for version 1.7h
- New AUX in commands added for dynamic throttle map modification, pace car control, car enable/disable, PC initiated track call
- Auto throttle calibrate, initiated by squeezing a throttle trigger after selecting the throttle control menu
- Improved throttle setup menus including a throttle test screen
- Quick access to car ID by pressing both arrow buttons from any top level menu
- Overload detect is now output stage specific (PB Pro Standard or PB Pro Simple-H)
- Lane changers can now be disabled for up to 9 seconds after the start of a race
- All numerical information is now displayed in decimal
- Countdown before restarting after a track call
PB Pro 1.8f - released 24th December 2008
New features for version 1.8f
- Analogue drive mode
- Qualify race mode with limited duration and/or laps
- Rally race mode
- Direct car drive (including lane change and brake) via Aux port
PB Pro 1.8h - released 21st April 2009
New features for version 1.8h
- False start registration bug fixed
- Track call status added to Aux Out data stream
- Race Pause and Race Resume Aux In commands now only initiate or cancel a track call if a race is active or paused
Important Note:
It has been found during tests that the overload detect is not as sensitive in analogue mode as it is in digital mode, particularly at lower throttle speeds. Avoid prolonged short circuits when in analogue mode.
Do not put analogue cars on the track when in digital mode.
Download Files:
PB Pro version 0.8
Version 0.8 User Manual
PB Pro version 1.6g
Version 1.6 User Manual
PB Pro 1.7h for standard PB
PB Pro 1.7h for Simple-H PB
Version 1.7 User Manual
PB Pro 1.8f for standard PB
PB pro 1.8f for Simple-H PB
PB Pro 1.8h for standard PB
PB Pro 1.8h for Simple-H PB
Select manual from list
PC bootloader software